Datasheet

BUF08821EVM-USB Software Overview

www.ti.com

5.2.4 Write DAC Button

The method used to write the values in the DAC/V

COM

registers is based on whether or not the Auto Write

feature is enabled. The BUF08821 has two methods of writing information into the DAC/V

COM

registers.

The first method allows for the output voltage to change immediately after the writing to the DAC register.

In the BUF08821EVM-USB software, this mode is configured by enabling the Auto Write feature found in

the Buffer Menu dropdown menu. In this mode, as an individual channel is written to, the output voltage

changes as soon as the user moves to a different text box in the software. The second method of writing

to the DAC/V

COM

registers allows for the user to write multiple channels and then have all of the output

voltages change at the same time, rather than each channel voltage changing as soon as it is written to.

Disabling the Auto Write feature in the software allows the user to enter all of the values desired for all of

the channels and then press the Write DAC button to change all of the output voltage of all of the

channels at one time. When the Auto Write feature is enabled, no change occurs to the output voltages

when the Write DAC button is pressed. No change occurs because after the text box for a given channel

has been updated, as soon as another item in the software is clicked, the Auto Write feature automatically

performs a write command to the updated channel that then updates the output voltage. When in the Auto

Write enabled mode, the Write DAC button cannot be pressed with different data in the corresponding

channel text boxes than the values already stored in the DAC/V

COM

Figure 17 shows the location in the Buffer Menu showing the Auto Write feature enabled. Clicking on the

Auto Write feature again enables/disables the feature, depending on its current state.

Figure 17. Auto Write Feature Enabled

5.2.5 Reset Button

Pressing the Reset button in the BUF08821EVM-USB software performs two functions. The first function

is to call a General-Call Reset for the BUF08821. The status of the DAC/V

COM

registers after this

General-Call Reset has been called depends upon whether the OTP has been programmed or not. If the

OTP has been programmed, the channel registers will be loaded with the last values programmed into the

OTP memory. If the OTP memory has not been programmed, the channel registers will default to

1000000000, or mid-supply. The second function performed after the Reset button is pressed is that a

Read DAC call is made to update the corresponding channel text boxes to the current value for each

channel.

BUF08821EVM-USB User Guide and Software Tutorial SBOU095–March 2011

Submit Documentation Feedback