Datasheet

www.ti.com

BUF08630EVM Software Overview

5.2.9 Run Batch Button

The Run Batch button (as highlighted in Figure 24) enables the user to configure the BUF08630 to cycle

through different register configurations in a continuous loop. When connected to the end application, this

feature can be used to cycle through different gamma settings to determine what the optimal settings must

be for a given application.

When the Run Batch button is pressed, a new dialog box displays as Figure 24 shows. The delay time is

the amount of time allowed between loading new configurations into the BUF08630 DUT.

Use the Single Step Up and Single Step Down buttons to step through the selected files manually. The

currently-selected file name is displayed in the lower left corner area of the dialog box. Double-click on the

file names to select them. Once a series of filenames have been selected, the check box turns dark.

Double-click on a filename again to unselect it from the batch run.

Figure 24. Run Batch Dialog Button and Window

SBOU091–September 2010 BUF08630EVM User Guide and Software Tutorial

Submit Documentation Feedback