Datasheet

www.ti.com

BUF08630EVM Software Setup

4 BUF08630EVM Software Setup

This section discusses how to install the BUF08630 software.

4.1 Operating Systems for BUF08630EVM Software

The BUF08630EVM software has been tested on the Microsoft Windows XP, Windows Vista, and

WIndows7 operating systems (OSs) with United States and European regional settings.

4.2 BUF08630EVM Software Installation

The BUF08630EVM software is included on the CD that is shipped with the EVM kit. It is also available

through the BUF08630EVM product folder on the TI web site. To download the software to your system,

insert the disc into an available CD-ROM drive. Navigate to the drive contents and open the

BUF08630EVM software folder. Locate the compressed file (BUF08630EVM.zip) and open it. Using

WinZIP

or a similar file compression program, extract the BUF08630EVM files into a specific BUF08630

folder (for example, C:\BUF08630) on your hard drive.

Figure 11. BUF08630EVM Software Install Window

After the installation process initializes, the user must choose the directory where the program is to be

installed, usually defaulting to C:\Program Files\BUF08630\ and C:\Program Files\National Instruments\.

Following this selection, two license agreements are presented that must be accepted; see Figure 12.

After accepting the Texas Instruments and National Instruments license agreements, the progress bar

opens and shows the installation of the software. Once the installation process is completed, click Finish.

SBOU091–September 2010 BUF08630EVM User Guide and Software Tutorial

Submit Documentation Feedback