Datasheet

BUF08630EVM Hardware Overview www.ti.com
3.6 BUF08630EVM Default Jumper Settings
Figure 9 shows the default jumpers configuration for the BUF08630EVM. In general, the jumper settings of
the USB_DIG Platform will not need to be changed. You may want to change some of the jumpers on the
BUF08630_Test_Board to match your specific configuration. For instance, you may wish to set a specific
I
2
C address on the DUT.
Figure 9. BUF08630EVM Default Jumper Settings
10
BUF08630EVM User Guide and Software Tutorial SBOU091–September 2010
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated