Datasheet

+-
24.0V 100mA
Power Supply1
50mV 100mA
Power Supply2
- +
Personal Computer
Windows XP32 Bit
with
bq76925 Evaluation
Software Installed
USB
USB-TO-
GPIO
Adapter
www.ti.com Quick-Start Demonstration
Figure 4. Demo With Two Power Supplies
Remove the shunt from header J5. Use the second power supply to apply 50 mV between pin 1 of header
J5 and the BATT- terminal. This simulates approximately –50 A or –50,000 mA, of discharge current.
Figure 5. Voltage, Temperature, and Current Measurement in the Evaluation Software
15
SLUU514–July 2011 bq76925EVM Evaluation Module
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated