Datasheet

www.ti.com

Operation

Figure 9. DataRAM Screen

This screen (Figure 9) shows the DataRAM data set. Additional Flags/Status Bits data can be viewed at

the bottom of the DataRAM screen.

Dragging the splitter bar (line that separates the Flags/Static Bits data from SBS values) changes the

height of the Flags/Static Bits data display. Selecting | View |, then | Auto Arrange | returns the splitter bar

to its original location.

8.2 Setting Programmable bq27545 Options

The bq27545 data flash comes configured per the default settings detailed in the bq27545 data sheet

(SLUSAT0). Ensure that the settings are correctly changed to match the pack and application for the

bq27545 solution being evaluated.

IMPORTANT: The correct setting of these options is essential to get the best performance.

The settings can be configured using the Data Flash screen (Figure 10).

SLUU984–September 2012 bq27545EVM Single-Cell Impedance Track™ Technology Evaluation Module

Submit Documentation Feedback