Datasheet

Circuit Module Physical Layouts, Bill of Materials, and Schematic

www.ti.com

Table 2. Bill of Materials (continued)

1 R21 1.8M Resistor, Chip, 1/10W, 1% 603 ERJ-3EKF1804V Panasonic

2 R8, R9 2.21k Resistor, Chip, 1/10W, 1% 603 ERJ-3EKF2211V Panasonic

1 R24 0.01 Resistor, Chip, 1/4W, 1% 805 WSL0805R0100FEA18 Vishay

4 J2, J5, J7, J13 ED555/2DS Terminal Block, 2-pin, 6-A, 3.5mm 0.27 x 0.25 ED555/2DS OST

1 J12 ED555/3DS Terminal Block, 3-pin, 6-A, 3.5mm 0.41 x 0.25 inch ED555/3DS OST

0 TP1, TP2, TP3, TP4, TP5, DNP Test Point, 0.020 Hole 0.100 x 0.100 inch

TP6, TP7, TP8, TP9,

TP10, TP11, TP12, TP13,

TP14, TP15, TP16, TP17,

TP18, TP19, TP20, TP21,

TP22, TPA1, TPA2,

TPD1, TPD3, TPDE3,

TPE3

1 TP20 131-4244-00 Adaptor, 3.5-mm probe clip ( or 131-5031- 0.200 inch 131-4244-00 Tektronix

00)

1 U1 bq24192RGET IC, I2C Controlled 4.5A Single Cell QFN-24 bq24192RGET TI

USB/Adapter Charger

1 U2 bq27531- IC, Battery Management Unit Impedance BGA bq27531-G1YZFT TI

G1YZFT Track Fuel Gauge With bq24192 Charger

Controller

1 RT1 10K Thermistor, NTC, 3-A 0.095 X 0.150 inch 103AT-2 Semitec

5 Shunt, 100-mil, Black 0.100 929950-00 3M

1 PCB PWR216 Any

bq27531EVM with bq27531 Battery Management Unit Impedance Track™ Fuel SLUUA90–April 2013

Gauge and bq24192 4.5-A, Switch-Mode Battery Charger for Single-Cell

Submit Documentation Feedback

Applications