Datasheet

Hardware Connection
3-3
EVM Hardware and Software Setup
3.2.2 PC Interface Connection
The following steps configure the hardware for interface to the PC:
1) Connect bq26231EVM-001 to the EV2200 using wire leads as shown in
Table 3–1.
Table 3–1.Circuit Module-to-EV2200 Connection
bq26231 Based Battery EV2200
HDQ SMBD/HDQ1
PACK– VSS
2) Connect the PC serial cable to the EV2200 and the PC COM port.
The bq26231EVM–001 is now set up for operation.