Datasheet

SLUU151 – April 2003
10
bq26220EVM-001 Single Cell Battery Monitor Evaluation Module
3.2.2 PC Interface Connection
The following steps configure the hardware for interface to the PC:
1. Connect bq26220EVM–001 to the EV2200 using wire leads as in the following table.
Table 4. Circuit Module-to-EV2200 Connection
bq26220 Based Battery EV2200
HDQ SMBD/HDQ1
PACK– VSS
2. Connect the PC serial cable to the EV2200 and the PC COM port.
The bq26220EVM-001 is now set up for operation.