Datasheet

www.ti.com

Bill of Materials, Board Layout, and Schematics

Table 2. Bill of Materials (continued)

-001 -002

RefDes Value Description Size Part Number MFR

bq24725A bq24735

1 1 R20 100k Resistor, Chip, 1/16W, 1% 603 Std Std

1 1 R21 12.1k Resistor, Chip, 1/16W, 1% 603 Std Std

1 1 R22 316k Resistor, Chip, 1/16W, 1% 603 Std Std

1 1 R23 3.01M Resistor, Chip, 1/16W, 1% 603 Std Std

1 1 R24 10 Resistor, Chip, 1/16W, 1% 603 Std Std

1 1 TP1 131-4244-00 Adaptor, 3.5-mm probe clip ( or 131-5031-00) 0.200 inch 131-4244-00 Tektronix

11 11 TP2, TP3, TP4, TP5, TP6, Test Point, White, Thru Hole Color Keyed 0.100 x 0.100 inch 5002 Keystone

TP7, TP8, TP9, TP10,

TP11, TP12

1 1 TP13 GND Test Point, Black, Thru Hole Color Keyed 0.100 x 0.100 inch 5001 Keystone

0 0 TP14, 15, 16, 17, 18

4 4 6-32 NYL nuts NY HN 632 Building Fasteners

4 4 ST1,ST2,ST3,ST4 4816 STANDOFF M/F HEX 6-32 NYL .500" sf_thvt_325_rnd 4816 Keystone

1 0 U1 bq24725ARGR IC, SMBus Charge Controller with NMOS bq24725ARGR TI

Selector

0 1 U1 bq24735RGR IC, SMBus Charge Controller with NMOS bq24735RGR TI

Selector

1 1 — Label 1.25 x 0.25 inch THT-13-457-10 Brady

1 1 — HPA710 2.5x2.5inch 4 layer 2oz. PCB 2.5x2.5inch PCB Any

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants.

3. Use of no clean flux is not acceptable.

4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.

5. Install label after final wash. Text shall be 8 pt font. Text shall be per Table 1.

Table 1.

Assembly Number Text

HPA710-001 bq24725AEVM-710

HPA710-002 bq24735EVM-710

SLUU507A–June 2011–Revised September 2011 bq24735/725A Battery Charger Evaluation Module

Submit Documentation Feedback