Datasheet

Introduction

www.ti.com

1 Introduction

1.1 EVM Features

Refer to the respective data sheet (shown in Table 1) for detailed features and operation.

Table 1. Device Data Sheet

Device Name Literature Number

bq24190/2/2i/3 SLUSAW5B

bq24196 SLUSB98

bq24292i SLUSBI4

The bq24x9x evaluation module (EVM) is a complete charger module for evaluating an I

C-controlled

single NVDC-1 charge using the bq24x9x devices.

This EVM does not include the USB-to-GPIO interface board. To evaluate the bq24x9x EVM, a USB-to-

GPIO interface board must be ordered separately.

1.2 I/O Descriptions

Table 2 lists the jumper connections available on this EVM.

Table 2. EVM Connections

Jack Description

J1 – PMID PMID pin connection/Power bank output

J1 – VBUS Input: positive terminal

J1 – GND Input: negative terminal (ground terminal)

J2 – SYS Connected to system

J2 – BAT+ Connected to battery pack

J2 – GND Ground

J3 USB-to-GPIO connector (USB Interface Adapter Connector - HPA172)

J4 – INT INT pin connection

J4 – OTG OTG pin connection

J4-CE CE pin connection

J4-GND Ground

J5-TS2 External TS2 pin connection

J5-GND Ground

J6-TS1 External TS1 pin connection

J6-GND Ground

J7 Mini_USB Connector

bq24190/2/2i/3/6 and bq24292i EVM (PWR021) User's Guide SLUUA14C–October 2012–Revised August 2013

Submit Documentation Feedback