Datasheet

www.ti.com

Bill of Materials, Board Layout, and Schematic

Table 4. Bill of Materials (continued)

COUNT

RefDes Value Description SIZE PART NUMBER MFR

-001 -002 -003

1 1 1 TP2 131-5031-00 Adaptor, 3.5-mm probe clip 0.200 inch 131-4244-00 or Tektronix

131-5031-00

13 13 13 TP7 - TP19 5002 Test Point, White, Thru Hole Color Keyed 0.100 x 0.100 inch 5002 Keystone

1 1 1 TP20 5001 Test Point, Black, Thru Hole Color Keyed 0.100 x 0.100 inch 5001 Keystone

1 1 0 BQ24172RHL IC, Power Path Selector Stand-alone VQFN BQ24172RHL TI

Charger

0 0 1 BQ24171RHL IC, Power Path Selector Stand-alone VQFN BQ24171RHL TI

Charger

1 1 1 – PCB, 2.65 In x 3.00 In x 0.062 In HPA706 Any

4 4 4 Bumper foot (install after final wash) 0.440 x 0.2 SJ-5303 3M

4 4 4 Shunt, 100-mil, Black 0.100 929950-00 3M

1 1 1 – Label (See Note 5) 1.25 x 0.25 inch THT-13-457-10 Brady

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants.

Use of no clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted.

All other components can be substituted with equivalent MFG's components.

5. Install label after final wash. Text shall be 8 pt font. Text shall be per Table 5.

Table 5

Assembly Number Text

HPA706-001 BQ24172EVM-706-5V

HPA706-002 BQ24172EVM-706-15V

HPA076-003 BQ24171EVM-706-15V

SLUU462A–November 2010–Revised February 2011 bq24171EVM JEITA Compliant and bq24172EVM Stand-Alone Synchronous,

Switch-Mode, Battery-Charge With Integrated N-MOSFETs and Power Path

Submit Documentation Feedback

Selector