Datasheet

Introduction www.ti.com
1.4 I/O Description
Header/Terminal Block Description
J1–TS External thermistor positive terminal
J1–GND Ground terminal for external thermistor
J2–BAT Battery positive header
J3-BAT Battery positive terminal
J3-GND Battery negative terminal
J4-IN Adapter positive header
J5-IN Adapter positive terminal
J5-GND Adapter negative terminal
J6-GND Battery negative terminal
J7-GND Adapter negative terminal
J8-USB USB positive header
J9-USB USB positive terminal
J9-GND USB negative terminal
J10-SYS System output positive header
J11-GND USB negative header
J12 USB Miniconnector
J13-SYS System output positive terminal
J13-GND System output negative terminal
J14-GND System output negative header
J15-DRV DRV reference voltage positive header
J16-DRV DRV reference voltage positive terminal
J16-GND DRV reference voltage negative terminal
J17 USB-TO-GPIO box connector
1.5 Test Points
Test Point Description
TP1 Kelvin to VIN
TP2 STAT
TP3 Kelvin to BAT
TP4 Kelvin to USB
TP5 DRV
TP6 INT
TP7 Kelvin to SYS
TP8 GND
TP9 GND
TP10 SW
TP11 SCL
TP12 SDA
TP13 TS
1.6 Control and Key Parameters Setting
4
WCSP-Packaged bq24160/161/163/168 Evaluation Modules SLUU496A –December 2011– Revised January 2012
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated