Datasheet

Introduction www.ti.com
1.4 I/O Description
Header/Terminal Block Description
J1-IN Adapter positive header
J2-IN Adapter positive terminal
J2-GND Adapter negative terminal
J3-GND Adapter negative header
J4-USB USB positive header
J5-SYS System output positive header
J6-USB USB positive terminal
J6-GND USB negative terminal
J7-SYS System output positive terminal
J7-GND System output negative terminal
J8-GND USB negative header
J9-GND System output negative header
J10-BAT+ Battery positive header
J11-BAT+ Battery positive terminal
J11-GND Battery negative terminal
J12-GND Battery negative header
J13-DRV DRV reference voltage positive header
J14-DRV DRV reference voltage positive terminal
J14-GND DRV reference voltage negative terminal
J15-GND DRV reference voltage negative header
J16–IN External thermistor positive terminal
J16–GND Ground connection for external thermistor
1.5 Test Points
Test Point Description
TP1 Kelvin to IN
TP2 Kelvin to USB
TP3 SW
TP4 Kelvin to SYS
TP5 GND
TP6 GND
TP7 IUSB3
TP8 Kelvin to BAT
TP9 IUSB1
TP10 IUSB2
TP11 ISET
TP12 ILIM
TP13 CE2 for bq24165 or TS for bq24166/167
TP14 CE1 for'bq24165 or CE for bq24166/167
4
Chipscale-Packaged bq24165, 24166, 24167 Evaluation Modules SLUU497B –December 2011–Revised June 2012
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated