Datasheet

BQ2415x EVM
DC+
J 1
DC -
BAT+
SC L
BAT -
APPLICATION
CIRCUIT
U1
J3
J5
J 4
J2
D1
JMP1 JMP2
JMP3
AUXPWR
CD
SDA DC- DC- ST AT OTG S LRS T
JMP5
JMP4
V
Iin
I
Power
supply#1
V
I
Load
#2
Ichrg
USB
Cable
HPA172
Ribbon
Cable
www.ti.com Test Summary
Table 1. Factory Jumper Settings (continued)
Spin JMP1 JMP2 JMP3 JMP4 JMP5
HPA256-003 (-LED-) ON (-LO-) ON OFF (-LO-) ON ON
(bq24158)
HPA256-003 (-LED-) ON (-LO-) ON OFF (-LO-) ON ON
(bq24157)
HPA256-003 (-LED-) ON (-HI-) ON OFF (-LO-) ON ON
(bq24159)
8. After the preceding steps, the test setup for HPA697 is shown in Figure 2
Figure 2. Charging Function Test Setup
9. Turn on the computer.
• Open the bq24153A_9 evaluation software. Select part number and click the GO button. The main
window of the software is shown in Figure 3.
5
SLUU453B–November 2010–Revised September 2012 bq24153A/56A/57/58/59 Fully Integrated, Switch-Mode, One-Cell, Li-Ion
Charger With Full USB Compliance and USB-OTG Support EVM
Submit Documentation Feedback
Copyright © 2010–2012, Texas Instruments Incorporated