Datasheet

bq24083
www.ti.com .............................................................................................................................................................. SLUS848A – MAY 2008 – REVISED APRIL 2009
TYPICAL CHARACTERISTICS (continued)
(1) No battery – In termination deglitch prior to STAT1 going high. V
OUT
(V
BAT
) cycling between charge and done prior to screen capture.
(2) Stat1 goes high – In done state
(3) 2-V battery is inserted during the charge done state.
(4) Charging is initiated – STAT1 goes low and charge current is applied.
(5) Battery is removed – V
OUT
goes into regulation, I
OUT
goes to zero, and termination deglitch timer starts running (same as state 1).
(6) Deglitch timer expires – charge done is declared.
Figure 5. Battery Hot-Plug and Removal Power Sequence
Copyright © 2008 – 2009, Texas Instruments Incorporated Submit Documentation Feedback 9
Product Folder Link(s) :bq24083