Datasheet

www.ti.com
6 Physical Layouts
6.1 Board Layout
K001
2.30
1.79
Physical Layouts
This section contains the board layout and assembly drawings for the EVM.
Figure 3 shows the top assembly view of the EVM. Figure 5 shows the top etch layer of the EVM. Figure 6
shows the board second etch layer of the EVM. Figure 7 shows the board third etch layer of the EVM.
Figure 8 shows the bottom etch layer of the EVM.
Figure 3. Top Assembly View
SLUU248A – May 2006 – Revised August 2006 bq24070/1 1.5-A Single-Chip Li-Ion and Li-Pol Charge Management IC EVM 7
Submit Documentation Feedback