Datasheet

Schematics, Physical Layouts, and Bill of Materials

www.ti.com

Table 2. HPA379A BOM – bq24055 (continued)

Count RefDes Value Description Size Part Number MFR

1 R8 50kΩ Potentiometer, 1/4 in. Cermet, 12-Turn, 0.25x0.17 3266W-1-503LF Bourns

Top-Adjust

1 U1 BQ24055 IC, 800mA, Single-Input, Single Cell Li-Ion SON-12 BQ24055DSS TI

BATTERY CHARGER with Automatic AC/USB

Detection

6 929950-00 Shunts 100 mill Black 3M

1 -- PCB, 2.4 In x 1.9 In x 0.031 In HPA379 Any

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants.

Use of no clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted.

All other components can be substituted with equivalent MFG's components.

5. Apply shunt to JMP1:DC+/IN_IC; JMP2:GND/PreTerm; JMP3:GND/ISET2; JMP4:LED/CHG; JMP5:GND/TS; JMP6:LED/PG

0.8-A, Single-Input, Single-Cell Li-Ion Battery Charger SLUU378–September 2009

Submit Documentation Feedback