Datasheet

SLUU156 – April 2003
12
bq24022 (bqTINY-II) Evaluation Module
5 List of Materials
Table 4 lists the materials required for the bq24022EVM.
Table 4. List of Materials
REFERENCE
DESIGNATOR
COUNT DESCRIPTION SIZE MANUFAC PART NUMBER
C1, C2, C3 3 Capacitor, ceramic, 1-µF, 16-V, X7R 805 Standard Standard
D1 1 Diode, LED, red, 1.8-V, 20-mA, 20-mcd 603 Liteon 160–1181–1–ND
D2, D3 2 Diode, LED, green, 2.1-V, 20-mA, 6-mcd 603 Liteon 160–1183–1–ND
J1, J8 2 Terminal block, 2-pin, 6-A, 3.5-mm 0.27 x 0.25 OST ED1514
J10 1 Terminal block, 3-pin, 6-A, 3.5-mm 0.41 x 0.25 OST ED1515
J2 1 Connector, USB upstream (type B) 0.47 x 0.67 Molex 67068–1000
J3, J4, J6, J7, J9 5 Header, 3-pin, 100-mil spacing, (36-pin strip) 0.100 x 3 Sullins PTC36SAAN
J5 1 Terminal block, 4-pin, 6-A, 3.5-mm 0.55 x 0.25 OST ED1516
R1, R2, R6 3 Resistor, chip, 1.5-kΩ, 1/16-W, 1% 603 Standard Standard
R3 1 Resistor, chip, 1.13-kΩ, 1/16-W, 1% 603 Standard Standard
R4 1 Resistor, chip, 20-kΩ, 1/16-W, 1% 603 Standard Standard
R5 1 Resistor, chip, 0-kΩ, 1/16-W, 1% 603 Standard Standard
R7 1 Resistor, chip, 1-kΩ, 1/16-W, 1% 603 Standard Standard
U1 1 Integrated circuit, single Li-ion, Li-poly, charge manager MLP10 Texas Inst. bq24022DRCR
n/a 5 Shunt, 100-mil, black 0.1 3M 929950–00
n/a 1 PCB, 2.13” × 1.25” x 0.31” – Any HPA004–bq24022
Assembly Notes:
1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants.
3. These assemblies must comply with IPC–A–610 class 2 or better.
4. Reference designators marked with an asterisk (**) cannot be substituted
5. All other components can be substituted with equivalent manufacturer’s components
6 References
1. Single-Chip Li-Ion and Li-Pol Charger IC with Autonomous USB-Port and AC-Adapter Supply
Management (bqTINY–II) bq24022 datasheet (SLUS549)