Datasheet
bq24004
bq24005
bq24006
SLUS476F –DECEMBER 2000–REVISED MAY 2012
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
PACKAGE
CHARGE STATUS
T
J
20-LEAD HTTSOP PowerPAD™
CONFIGURATION
(PWP)
(1) (2)
bq24004PWP Single LED
–40°C to 125°C bq24005PWP 2 LEDs
bq24006PWP Single bicolor LED
(1) The PWP package is available taped and reeled. Add R suffix to device type (e.g., bq24005PWPR) to order. Quantities 2500 devices
per reel.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at www.ti.com.
PACKAGE DISSIPATION RATINGS
T
A
≤ 25°C DERATING FACTOR
PACKAGE Θ
JA
Θ
JC
POWER RATING ABOVE T
A
= 25°C
PWP
(1)
30.88°C/W 1.19°C/W 3.238 W 0.0324 W/°C
(1) This data is based on using the JEDEC high-K board and topside traces, top and bottom thermal pad (6,5 × 3,4 mm), internal 1-oz.
power and ground planes, 8 thermal via underneath the die connecting to ground plane.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted
(1)
bq24004
bq24005
bq24006
Supply voltage (V
CC
with respect to GND) 13.5 V
Input voltage (IN, ISNS, EN, APG/THERM/CR/STAT1/STAT2, VSENSE, TMR SEL, VSEL) (all with
13.5 V
respect to GND)
Output current (OUT pins) 2 A
Output sink/source current (STAT1 and STAT2) 10 mA
T
A
Operating free-air temperature range –40°C to 70°C
T
stg
Storage temperature range –65°C to 150°C
T
J
Junction temperature range –40°C to 125°C
Lead temperature (Soldering, 10 s) 300°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
MIN MAX UNIT
V
CC
Supply voltage 8.4 10 V
V
IN
Input voltage 8.4 10 V
Continuous output current 1.2 A
T
J
Operating junction temperature range –40 125 °C
2 Submit Documentation Feedback Copyright © 2000–2012, Texas Instruments Incorporated
Product Folder Link(s): bq24004 bq24005 bq24006