Datasheet

www.ti.com
Permanent Failure Configuration (PF Config)
bq2084-V143
SLUS732 – SEPTEMBER 2006
PF Config DF 0x11f contains the enable/disable configuration that determines if the SAFE output is activated
and the PF Flag set for each possible failure mode.
b7 b6 b5 b4 b3 b2 b1 b0
- XPFIN XFETF XCIM XAFE XSOTD XSOTC XSOV
XSOV
The XSOV bit enables or disables the activation of SAFE and the setting of the PF Flag when PF Status SOV
is set.
0 Activation disabled (default)
1 Activation enabled
XSOTC
The XSOTC bit enables or disables the activation of SAFE and the setting of the PF Flag when PF Status
SOTC is set.
0 Activation disabled (default)
1 Activation enabled
XSOTD
The XSOTD bit enables or disables the activation of SAFE and the setting of the PF Flag when PF Status
SOTD is set.
0 Activation disabled (default)
1 Activation enabled
XAFE
The XAFE bit enables or disables the activation of SAFE and the setting of the PF Flag when PF Status AFE is
set. Bit 13 of Miscellaneous Config DF 0x2a also needs to be set for activation.
0 Activation disabled (default)
1 Activation enabled
XCIM
The XCIM bit enables or disables the activation of SAFE and the setting of the PF Flag when PF Status CIM is
set.
0 Activation disabled (default)
1 Activation enabled
XFETF
The XFETF bit enables or disables the activation of SAFE and the setting of the PF Flag when PF Status FETF
is set.
0 Activation disabled (default)
1 Activation enabled
XPFIN
The XPFIN bit enables or disables the activation of SAFE and the setting of the PF Flag when PF Status PFIN
is set.
0 Activation disabled (default)
1 Activation enabled
25
Submit Documentation Feedback