Datasheet

bq2026EVM Circuit Module Bill of Materials

www.ti.com

Figure 5. bq2026EVM Bottom Layer

5 bq2026EVM Circuit Module Bill of Materials

Table 2 presents the bill of materials required for the bq2026EVM circuit module.

Table 2. Bill of Materials

Count RefDes Description Size MFR Part Number

2 D1, D2 Diode, Zener, 5.6-V, 350-mW SOT-23 Diodes, Inc. BZX84C5V6

1 J3 Header, 2-pin, 100-mil spacing, (36-pin strip) 0.100 x 2 Sullins PTC36SAAN

3 R1, R2, R6 Resistor, Chip, 100-Ω, 1/16-W, 5% 603 Std Std

1 R3 Resistor, Chip, 100-kΩ, 1/16-W, 5% 603 Std Std

1 R4 Resistor, Chip, 10-kΩ, 1/16-W, 5% 603 Std Std

1 R5 Resistor, Chip, 15-kΩ, 1/16-W, 5% 603 Std Std

0 R7*, R8* Resistor, Chip, 2.7-kΩ, 1/16-W, 5% 603 Std Std

1 XU1 Socket, SOT-23, 6P SOT-23-6 WELLS-CTI 499-P44-20

1 J1 Header, Friction Lock Ass'y, 4-pin Right Angle 0.400 x 0.500 Molex 22-05-3041

1 J2 Terminal Block, 2-pin, 6-A, 3.5-mm 0.27 x 0.25 inch OST ED1514

0 GND* Test Point, Black, 1-mm 0.038 Keystone 5001

0 SDQ* Test Point, Red, 1-mm 0.038 Keystone 5000

2 U2,U3* Socket Pin - Install First DIA_038, PIN_013-020, EXP_146, Tyco 50935

B125

1 Q1 MOSFET, N-ch, 60-V, 115-mA, 1.2-Ω SOT23 Vishay-Liteon 2N7002-7-F

1 Q2 MOSFET, Pch, -20-V, 3.7-A, 65 mΩ SOT23 IR IRLML6402

1 -- PCB, 2 In x 1.25 In x 0.125 In Any bq2026EVM Board

1 N/A Shunt, 100-mil, Black 0.1 3M 929950-00

bq2026 Evaluation Software SLUU763– December 2011

Submit Documentation Feedback