Datasheet

Starting the Program
4-2
4.1 Starting the Program
Run EV2201-23 from the Start|Programs|Texas Instruments|bq2023 Battery
Monitor menu sequence. The software defaults to PC com port 1 for
communication. If the EV2201 is connected to com port 1, the program loads
and displays the initial data screen.
Figure 4–1. Initial Data Screen
The data screen may not show correct information until parameters in the soft-
ware are initialized.
If the EV2201 is connected to PC com port 2 or no port, the program will display
a warning.
Once OK is clicked, the program loads the initial register screen. The com port
can be changed by selecting the port under the Options menu.
Figure 4–2. Communications (Comm) Port Selection Warning Screen