Datasheet

Software Installation

7-2

7.1 Software Installation

The following steps install the EV2200–HDQ software:

1) Insert disk 1 into a 3 1/2 inch floppy drive.

2) Select the 3 1/2 inch drive using My Computer or File Manager.

3) Double-click the Setup.exe icon.

The setup program prompts for the remaining disks and installs a Windows

application group.

7.2 Hardware Connection

There are three hardware components to the bq2013H EVM: The DM2013H

circuit module, the EV2200 PC interface board, and the PC.

7.2.1 Connecting the DM2013H to a Battery Pack

Figure 7–1 shows how to connect the DM2013H to a stack of cells, the sense

resistor, and the system load/charger.

Figure 7–1. DM2013H Connection to Cells, Sense Resistor, and System Load/Charger

Battery Pack

PACK– PACK+ PACK– PACK+

Charger

Load

DM2013H

Charger

Load

DM2013H

SNS

CellsCells

<20 V

(b) Setup for >20 V Battery Packs(a) Setup for <20 V Battery Packs