User's Manual

BiWaze® Clear System - User Manual Page | 30
8. Press the X on the top right to
close the date and time window.
6.7 SpO2 Configuration
BiWaze Clear is validated with the Nonin SpO2 sensor with USB Connector. The information collected via the
external sensor is displayed on the main screen during therapy.
To connect the Nonin SpO2 sensor to BiWaze Clear:
1. Connect the finger sensor cable to the USB controller cable.
2. Connect the USB controller cable to one of the two USB ports located on the side panel of BiWaze Clear.
3. Insert the patient’s finger into the SpO2 sensor
4. The oxygen and heart rate recorded by the external sensor will display on the main screen during therapy.