Datasheet

USB
Connection 10-Pin
SM-USB-DIG
AMC80EVM
Test Board
AMC80EVM Hardware Setup www.ti.com
Table 1 details the contents of the AMC80EVM kit.
Table 1. Contents of AMC80EVM Kit
Item Quantity
AMC80 PCB Test Board 1
SM-USB-DIG Platform PCB 1
USB Cable Extender 1
User’s Guide CD 1
10-Pin Ribbon Cable 1
1.2 If You Need Assistance
If you have questions about the AMC80 evaluation module, contact the Linear Amplifiers Applications
Team at [e-mail]. Include AMC80EVM as the subject heading. Customer support is also
available through our user community, which is monitored by TI application engineers, at http://e2e.ti.com.
1.3 Related Documentation from Texas Instruments
The following documents provide information regarding Texas Instruments' integrated circuits used in the
assembly of the AMC80EVM. This user's guide is available from the TI web site under literature number
SBOU101. Any letter appended to the literature number corresponds to the document revision that is
current at the time of the writing of this document. Newer revisions may be available from the TI website,
or call the Texas Instruments' Literature Response Center at [phone] or the Product Information
Center at (972) 644- 5580. When ordering, identify the document by both title and literature number.
Table 2. Related Documentation
Document Literature Number
AMC80 Product Data Sheet SBAS500
SM-USB-DIG Platform User’s Guide SBOU098
2 AMC80EVM Hardware Setup
The AMC80EVM hardware consists of the SM-USB-DIG Platform and the AMC80 Test Board; these two
units are easily connected through a 10-pin, board-to-board connector that should be attached to the
SM-USB-DIG Platform and the AMC80EVM. Once these two units are connected, simply plug the USB
device from the SM-USB-DIG Platform into the computer, as shown in Figure 2.
Figure 2. AMC80EVM Hardware Setup
4
AMC80EVM SBOU101–March 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated