Datasheet

AMC80EVM Software Overview www.ti.com
The Manufacturer ID and Stepping/Die Revision ID registers can be updated by entering a value into the
respective control (as shown in Figure 21) and pressing the Write all Reg button.
Figure 21. Manufacturer ID and Stepping/Die Revision ID Controls
5.2.8 Registers Tab
The Registers tab displays the individual register setting for the AMC80 sensors. For more information on
the individual registers and the bit meanings, simply highlight the desired register and hit the Help with
Reg button shown in Figure 22.
Figure 22. Registers Tab
The Registers tab also includes two dig_bits tables. The dig_bits tables allow the user to monitor and
change individual bits by highlighting the desired register and toggling the bit controls beneath it.
NOTE: Only writable register bits can be toggled.
16
AMC80EVM SBOU101–March 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated