Datasheet

www.ti.com AMC80EVM Software Overview
5.2.2 Writing to Registers
The AMC80EVM software contains two different methods for writing register data: Write All Reg and
Auto-Write Reg. Additionally, register configurations may be saved and recalled using the Save Register
File and Load Register File buttons indicated in Figure 14.
Figure 14. AMC80 Writing to Registers
5.2.3 Analog Inputs
Figure 15 shows example data read from an AMC80 device analog inputs. The Interrupt status indicator
turns bright green (as shown in Figure 15) when a high or low limit has been exceeded. The interrupt
clears only when the analog voltage is within the limits and the interrupt register has been read at least
once. The interrupt indicator then turns dark green.
Figure 15. AMC80 Analog Inputs
13
SBOU101–March 2011 AMC80EVM
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated