Datasheet

www.ti.com
Legend: indicates the corresponding pins that are shorted or closed.
3.5 Schematic
EVM Operation
Table 3. Jumper Settings and Functions (continued)
Reference Jumper Setting Function
The EEPROM, U4, address is set to 010b. This is only used with a PC graphical user interface
application program. See section 3.3.
W10
The EEPROM, U4, address is set to 000b. This is only used with a PC graphical user interface
application program. See section 3.3.
Digital ground is not connected to analog ground.
W11
Digital ground is connected to analog ground.
SLAU171 – November 2005 AMC7823 Evaluation Module 13