Datasheet

GUI Software and Operating Descriptions www.ti.com
Next, shift to the ADC channels tab, as shown in Figure 13. Then:
• Power up the ADC by clicking on the control next to the label ADC Power
• Click the pulldown menu for CH0/CH1 configuration and select CH0 and CH1 as SE
• Click the pulldown menu for CH2/CH3 configuration and select CH2 and CH3 as SE
Figure 13. AMC7812EVM-PDK Software GUI: Analog Loopback Test of CH0~CH3
The digital from CH0—CH3 should now be displayed in the graphic area; the corresponding indicators on
the right side of the screen should also reflect the full-scale output from the DAC channels. The resulting
waveform should appear as Figure 13 illustrates.
24
AMC7812EVM-PDK User’s Guide SBAU177A–September 2010–Revised May 2013
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated