Datasheet
GUI Software and Operating Descriptions
www.ti.com
At the lower right-hand section of the GUI, there is a control button to enable or disable the auto-read
function of the AMC7812 registers. If it is enabled, all registers of the AMC7812 are read continuously.
The AMC registers include: temperature data, alarm data, ADC data, and DAC data. Additionally the fifth
tab on the AMC7812EVM software, Register Map (see Figure 14), is updated with the values read. If it is
disabled, the front panel does not update with any register changes on the AMC7812EVM.
7.2 AMC and Alarms Tab
This tab allows users to access or observe the AMC7812 registers and register bits related to common
programmable setting and alarms of the AMC7812. Clicking on this tab brings up another display screen,
as shown in Figure 6.
Figure 6. AMC7812EVM-PDK Software GUI: AMC and Alarms Tab
16
AMC7812EVM-PDK User’s Guide SBAU177A–September 2010–Revised May 2013
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated