Datasheet

EVM Hardware Configuration

www.ti.com

Click on the OK button to continue, and the software graphical user interface (GUI) appears, as Figure 4

illustrates.

Figure 4. AMC7812EVM-PDK Software GUI: Start-Up Screen with Monitoring Temp Tab

Three temperature monitoring sections appear, with the local (or AMC7812 silicon) temperature displayed

at the left section of the tab. The remote temperature to D1+/D1– input (from the onboard NPN transistor

2N3904) shows in the middle section; and another remote temperature to D2+/D2– input (from the

onboard PNP transistor 2N3906) appears in the right section. The temperatures should be approximately

the same as the room temperature, as Figure 4 shows.

AMC7812EVM-PDK User’s Guide SBAU177A–September 2010–Revised May 2013

Submit Documentation Feedback