Datasheet

USB
J7
J11 J12
J16 J17
USB-MODEVM
J13
J18
TAS1020B
J1 J2
J4
J5
J3
AMC
Analog
Inputs
Digital
Interface
Analog
Outputs
Power
Supplies
Control Interface
(SPI, I C)
2
www.ti.com
EVM Hardware Configuration
6 EVM Hardware Configuration
The following sections of this user guide provide information about operating the AMC7812EVM-PDK,
including setup, program installation, and software use as well as its operational description.
6.1 EVM-PDK Setup
6.1.1 Hardware
The AMC7812EVM-PDK includes these components:
AMC7812EVM board
USB-MODEVM board
CD-ROM with evaluation software installer and related documents
Figure 2 shows the hardware block diagram of the AMC7812EVM-PDK.
Figure 2. AMC7812EVM-PDK Hardware Block Diagram and Connections
The two PCBs are connected together; the AMC7812EVM board is seated on top of the USB-MODEVM
board. Note that, as shown in Figure 2, connectors J1, J2, J3, J4, and J5 of the AMC7812EVM PCB
should be plugged into J11, J12, J16, J17, and J18 of the USB-MODEVM, respectively.
11
SBAU177ASeptember 2010Revised May 2013 AMC7812EVM-PDK User’s Guide
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated