Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
AMC6821
SBAS386C – MAY 2006 – REVISED JULY 2007
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
SPECIFIED
PACKAGE TEMPERATURE
PRODUCT PACKAGE-LEAD DESIGNATOR RANGE PACKAGE MARKING
AMC6821SDBQ QSOP-16 DBQ – 40 ° C to +125 ° C 6821S
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com .
Over operating free-air temperature range (unless otherwise noted).
VALUE UNIT
V
DD
to GND – 0.3 to +6.5 V
Digital input voltage to GND – 0.3 to +6.5 V
Input current 10 mA
Select pins A0, A1, PWM-MODE to GND – 0.3 to V
DD
+ 0.3 V
Analog input voltage to GND – 0.3 to V
DD
+ 0.3 V
Operating temperature range – 40 to +125 ° C
Storage temperature range – 65 to +150 ° C
Junction temperature (T
J
Max) +150 ° C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
2 Submit Documentation Feedback Copyright © 2006 – 2007, Texas Instruments Incorporated
Product Folder Link(s): AMC6821