Datasheet

Software

www.ti.com

3 Software

The program for evaluating the AMC1210MB-EVM is the AMC1210EVM software. This program uses the

NI-VISA™ client to communicate with the hardware through a USB port. The program currently runs only

on PCs with the Microsoft Windows XP operating system. Windows Vista and Windows 7 are not

supported.

3.1 Installation

Follow these procedures to install the AMC1210MB-EVM software.

Step 1. Install the AMC1210MB-EVM software and LabVIEW™ RunTime Engine software. The

screen shown in Figure 1 appears as you start this process.

Figure 1. AMC1210EVM Software Installation

Step 2. After the AMC1210EVM software is installed, apply power to the EVM and connect the EVM

to an available PC USB port. The computer should recognize new hardware and begin

installing the driver. Accept the default settings.

Figure 2 through Figure 5 show the driver installation sequence.

AMC1210MB-EVM SBAU188– February 2012

Submit Documentation Feedback