Datasheet

PRODUCTPREVIEW
AM335x
(ZCZ Package)
RTC_XTALIN
VSS_RTC
RTC_XTALOUT
C
1
C
2
Optional R
bias
Optional R
d
Crystal
AM335x
(ZCE Package)
RTC_XTALIN RTC_XTALOUT
C
1
C
2
Optional R
bias
Optional R
d
Crystal
AM3359, AM3358, AM3357
AM3356, AM3354, AM3352
www.ti.com SPRS717E –OCTOBER 2011–REVISED JANUARY 2013
A. Oscillator components (Crystal, C
1
, C
2
, optional R
bias
and R
d
) must be located close to the AM335x package.
Parasitic capacitance to the printed circuit board (PCB) ground and other signals should be minimized to reduce noise
coupled into the oscillator.
B. C
1
and C
2
represent the total capacitance of the respective PCB trace, load capacitor, and other components
(excluding the crystal) connected to each crystal terminal. The value of capacitors C
1
and C
2
should be selected to
provide the total load capacitance, C
L
, specified by the crystal manufacturer. The total load capacitance is C
L
=
[(C
1
*C
2
)/(C
1
+C
2
)] + C
shunt
, where C
shunt
is the crystal shunt capacitance (C
0
) specified by the crystal manufacturer
plus any mutual capacitance (C
pkg
+ C
PCB
) seen across the AM335x RTC_XTALIN and RTC_XTALOUT signals. For
recommended values of crystal circuit components, see Table 4-5.
Figure 4-11. OSC1 (ZCE Package) Crystal Circuit Schematic
A. Oscillator components (Crystal, C
1
, C
2
, optional R
bias
and R
d
) must be located close to the AM335x package.
Parasitic capacitance to the printed circuit board (PCB) ground and other signals should be minimized to reduce noise
coupled into the oscillator.
B. C
1
and C
2
represent the total capacitance of the respective PCB trace, load capacitor, and other components
(excluding the crystal) connected to each crystal terminal. The value of capacitors C
1
and C
2
should be selected to
provide the total load capacitance, C
L
, specified by the crystal manufacturer. The total load capacitance is C
L
=
[(C
1
*C
2
)/(C
1
+C
2
)] + C
shunt
, where C
shunt
is the crystal shunt capacitance (C
0
) specified by the crystal manufacturer
plus any mutual capacitance (C
pkg
+ C
PCB
) seen across the AM335x RTC_XTALIN and RTC_XTALOUT signals. For
recommended values of crystal circuit components, see Table 4-5.
Figure 4-12. OSC1 (ZCZ Package) Crystal Circuit Schematic
Copyright © 2011–2013, Texas Instruments Incorporated Power and Clocking 107
Submit Documentation Feedback
Product Folder Links: AM3359 AM3358 AM3357 AM3356 AM3354 AM3352