Datasheet

www.ti.com
22 kΩ
To Three Other Drivers
Common to All Four Drivers
GND
Enable G
Enable G
V
CC
V
V
Output Y
9 Ω
Input A
22 kΩ
22 kΩ
All resistor values are nominal.
Output Z
9 Ω
Absolute Maximum Ratings
(1)
AM26LS31C , AM26LS31M
QUADRUPLE DIFFERENTIAL LINE DRIVER
SLLS114I – JANUARY 1979 – REVISED FEBRUARY 2006
SCHEMATIC (EACH DRIVER)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage
(2)
7 V
V
I
Input voltage 7 V
Output off-state voltage 5.5 V
D package 73
DB package 82
θ
JA
Package thermal impedance
(3)
° C/W
N package 67
NS package 64
Lead temperature 1,6 mm (1/16 in) from case for 10 s 260 ° C
Lead temperature 1,6 mm (1/16 in) from case for 60 s J package 300 ° C
T
stg
Storage temperature range –65 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential output voltage V
OD
, are with respect to network GND.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
3
Submit Documentation Feedback