Datasheet

www.ti.com Overview
1 Overview
This document is intended as a step-by-step guide through the AFE5809EVM Evaluation Module (EVM)
setup and test. The EVM is shipped with a default configuration from the manufacturer. With this
configuration, the onboard CMOS clock is used for a analog-to-digital converter sampling clock; the
onboard oscillator is used for CW mode operation. No external clock generator is required. Users need to
provide the input signal for measurement from a signal generator.
Detail explanation regarding the jumpers, connectors, and test points appear in Section 11. The graphical
user interface (GUI) can be downloaded from the TI Web site.
2 Default Configuration
Figure 1 shows the default configuration of the EVM from the factory. The accompanying list identifies the
basic components on the EVM board.
Figure 1. AFE5809EVM Basic Configuration
3
SLOU338A–October 2012–Revised November 2012 AFE5809EVM Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated