Datasheet

Board Configuration

www.ti.com

Table 2. I/O, Power, and USB (continued)

Connector Description

TP33VD +3.3-VD supply test point

TP33VA +3.3-VA supply test point

TP14VD +1.4-VD supply test point

TP1 through TP4 Ground test points

USB1 USB interface connector

P13,P14 Test points for USB data bus: From pin 1 to pin 9, the signals are D0, D4, D2, D1, D7, D5, D6, and D3

11.2 CW Mode, ADC Clock

Figure 27. AFE5809EVM Jumper Locations

AFE5809EVM Evaluation Module SLOU338A–October 2012–Revised November 2012

Submit Documentation Feedback