Datasheet

-5VPowerSupply

+6Vsupply

USBInterface

+5VPowerSupply

Filterforinputsignal

VcntlSupply;

Ground

ADC(external)sampling

Power Up AFE5808/08A

www.ti.com

Figure 2. HW Setup With Connection Between TSW1250EVM and AFE5808/08A

5 Power Up AFE5808/08A

Power up the AFE5808/08AEVM by applying +5 V and –5 V to the P1 connector. After power up is

complete, four green LEDS and two red LEDS are turned on as shown in the following illustration.

AFE5808/08AEVM (Rev E) Evaluation Module SLOU328A– November 2011– Revised December 2011

Submit Documentation Feedback