Datasheet

Board Configuration www.ti.com
12.3 Vcntl Control Input
Figure 13. Vcntl
Table 4. CW Mode and Vcntl
Connector Description
JP15 Choose onboard Vcntl or external Vcntl. The default setup uses onboard Vcntl.
J14 External Vcntl input. The range is from 0 V to 1.5 V.
VR2 Onboard Vcntl adjustment. Use JP15 pin 3 which has the text On-Board to monitor the Vcntl voltage level.
22
AFE5808/08AEVM (Rev E) Evaluation Module SLOU328A– November 2011– Revised December 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated