Datasheet

C50
C52
External ADC Sampling Clock www.ti.com
Figure 8. Relevant Capacitors for CW Mode, Bottom Side
10 External ADC Sampling Clock
To use the external clock generator to test the AFE5808/08A, perform the following steps.
1. Reconfigure JP9 as shown in the following illustration. The rest of the jumpers remain the same.
2. Connect the external generator as shown in Figure 9.
3. Set the generator output to 40 MHz, 13 dBm.
16
AFE5808/08AEVM (Rev E) Evaluation Module SLOU328A– November 2011– Revised December 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated