Datasheet

TEST AFE5808/08A

www.ti.com

•

Press the Capture button on the TSW1250 GUI. You will observe a ramping waveform on the

TSW1250 GUI display area as shown in the following illustration.

• Repeat for Channel 2 and Channel 8.

• If each channel has the output as shown in the following illustration, proceed with the next

step; otherwise, contact the TI FAE to troubleshoot the problem.

• On the AFE5808/08A GUI, change Test Pattern from Ramp to None for the next step.

AFE5808/08AEVM (Rev E) Evaluation Module SLOU328A– November 2011– Revised December 2011

Submit Documentation Feedback