Datasheet

-5VPowerSupply

+6Vsupply

USBInterface

+5VPowerSupply

Filterforinputsignal

VcntlSupply;

Ground

ADC(external)sampling

Power Up AFE5807

www.ti.com

Figure 2. HW Setup With Connection Between TSW1250EVM and AFE5807

5 Power Up AFE5807

Power up the AFE5807EVM by applying +5 V and –5 V to the P1 connector. After power up is complete,

four green LEDS and two red LEDS are turned on as shown in the following illustration.

AFE5807EVM (Rev E) Evaluation Module SLOU329A– November 2011– Revised December 2011

Submit Documentation Feedback