Datasheet

www.ti.com Board Configuration
12.3 Vcntl Control Input
Figure 13. Vcntl
Table 4. CW Mode and Vcntl
Connector Description
JP15 Choose onboard Vcntl or external Vcntl. The default setup uses onboard Vcntl.
J14 External Vcntl input. The range is from 0 V to 1.5 V.
VR2 Onboard Vcntl adjustment. Use JP15 pin 3 which has the text On-Board to monitor the Vcntl voltage level.
23
SLOU329A– November 2011– Revised December 2011 AFE5807EVM (Rev E) Evaluation Module
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated