Datasheet

C50
C52
www.ti.com External ADC Sampling Clock
Figure 8. Relevant Capacitors for CW Mode, Bottom Side
10 External ADC Sampling Clock
To use the external clock generator to test the AFE5807, perform the following steps.
1. Reconfigure JP9 as shown in the following illustration. The rest of the jumpers remain the same.
2. Connect the external generator as shown in Figure 9.
3. Set the generator output to 40 MHz, 13 dBm.
17
SLOU329A– November 2011– Revised December 2011 AFE5807EVM (Rev E) Evaluation Module
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated