Datasheet

TEST AFE5807

www.ti.com

•

Press the Capture button on the TSW1250 GUI. This displays a ramping waveform on the TSW1250

GUI display area as shown in the following illustration.

• Repeat for Channel 2 and Channel 8.

• If each channel has the output as shown in the following illustration, proceed with the next

step; otherwise, contact the TI FAE to troubleshoot the problem.

• On the AFE5807 GUI, change Test Pattern from Ramp to None for the next step.

AFE5807EVM (Rev E) Evaluation Module SLOU329A– November 2011– Revised December 2011

Submit Documentation Feedback