Datasheet

AFE5804

SBOS442C –JUNE 2008–REVISED OCTOBER 2011

www.ti.com

PROGRAMMABLE GAIN

ADDRESS

IN HEX D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 NAME

X X X X GAIN_CH4<3:0>

X X X X GAIN_CH3<3:0>

X X X X GAIN_CH2<3:0>

X X X X GAIN_CH1<3:0>

X X X X GAIN_CH5<3:0>

X X X X GAIN_CH6<3:0>

X X X X GAIN_CH7<3:0>

X X X X GAIN_CH8<3:0>

The AFE5804, through its registers, allows for a digital gain to be programmed for each channel. This

programmable gain can be set to achieve the full-scale output code even with a lower analog input swing. The

programmable gain not only fills the output code range of the ADC, but also enhances the SNR of the device by

using quantization information from some extra internal bits. The programmable gain for each channel can be

individually set using a set of four bits, indicated as GAIN_CHN<3:0> for Channel N. The gain setting is coded in

binary from 0dB to 12dB, as shown in Table 17.

Table 17. Gain Setting for Channel 1

GAIN_CH1<3> GAIN_CH1<2> GAIN_CH1<1> GAIN_CH1<0> CHANNEL 1 GAIN SETTING

0 0 0 0 0dB

0 0 0 1 1dB

0 0 1 0 2dB

0 0 1 1 3dB

0 1 0 0 4dB

0 1 0 1 5dB

0 1 1 0 6dB

0 1 1 1 7dB

1 0 0 0 8dB

1 0 0 1 9dB

1 0 1 0 10dB

1 0 1 1 11dB

1 1 0 0 12dB

1 1 0 1 Do not use

1 1 1 0 Do not use

1 1 1 1 Do not use