Datasheet

www.ti.com

TEST AFE5803

• Press the Capture button on the TSW1250 GUI. This displays a ramping waveform on the TSW1250

GUI display area as shown in the following illustration.

• Repeat for Channel 2 and Channel 8.

• If each channel has the output as shown in the following illustration, proceed with the next

step; otherwise, contact the TI FAE to troubleshoot the problem.

• On the AFE5803 GUI, change Test Pattern from Ramp to None for the next step.

SLOU332A– January 2012– Revised January 2012 AFE5803EVM (Revision E ) Evaluation Module

Submit Documentation Feedback