Datasheet

www.ti.com

Software Installation and Operation

Figure 1. AFE5803EVM Basic Configuration

1. P1 – Power supplies connector.

2. JP1, JP2, and JP3 are set to enable 3.3-V, 1.8-V, and 5-V power supplies to device.

3. JP9: enables onboard CMOS clock.

4. JP10: Power supply for onboard CMOS clock oscillator.

5. JP15: Enables onboard VCNT.

6. JP31 always set as Figure 1.

3 Software Installation and Operation

The AFE5803EVM GUI (SLOC260) can be downloaded from the TI Web site. Follow the directions in

ReadMeFirst.pdf file to install GUI and device driver

SLOU332A– January 2012– Revised January 2012 AFE5803EVM (Revision E ) Evaluation Module

Submit Documentation Feedback